|
We are authorised distributor
& service provider
for Oxford Instruments'
X-Met range of analyzers
X-MET5000 & X-MET5100
specifically designed
for XRF (x-ray fluorescence)
testing - positive material
identification (PMI),
alloy analysis and sorting.
|
|
| |
| X-MET
hand-held XRF analyzers
are specifically designed
for |
- Positive material
identification (PMI)
- Metal identification
- Scrap sorting
- Analysis of alloys
and hazardous material
analysis (RoHS screening)
- Analysis of heavy
metals in soils on polluted
lands and ores at mining
sites
- Mining & mine
mapping
|
|
|
| |
|
|
Why X-MET from Oxford Instruments?
|
|
- Over 35 years experience
on portable XRF.
- Safe to use, thoroughly
tested by radiation safety
authorities
- High strength, rugged IP54
approved housing for superior
dust and splash water protection
- Easy data transfer by USB,
Bluetooth or memory card
- Save unlimited amount of
results and spectra
- Easy to operate, short learning
curve. Point and shoot analysis,
only short training needed
- User interface in more than
10 languages. User configurable
language available.
|
|
|
Manufacturer
product links:
http://www.oxford-instruments.com/handheld-xrf
|
|
| |
|
| X-MET for
SCRAP |
|
- Scrap sorting in seconds
- Quick and reliable separation
of metal alloys
- X-MET5100 for fast and accurate
light element analysis (Mg,
Al, Si, P and S).
- Extensive grade library
with over 400 alloys. Easy
to modify existing and add
new alloys.
|
|
|
|
|
| |
|
| X-MET for
PMI |
|
- Oxford Instruments' state
of the art SDD detector provides
superb light element analysis
(Mg, Al, Si, P and S) (X-MET5100)
- Fast and reliable PMI on
site
- Measure pipes, thin tubes,
flanges, valves, weld seams
etc.
- Measure wire down to 1 mm
diameter in just matter of
seconds
- Fast identification of close
grades, e.g. 304/321
- Withstands temperatures
up to 400 degrees Celsius
(X-MET5000)
- Traceable empirical calibrations
for ultimate confidence
- Totally non-destructive
testing
- Extensive grade library
with over 400 alloys. Easy
to modify existing and add
new alloys.
|
|
|
|
|
| |
|
| X-MET for
Minerals (Soil and Mining) |
|
- A true multipurpose tool
for soil and mining analysis
- Identify hot spots and extremities
of contaminated soil. Save
money in landfill fees.
- Quick and reliable Go/No-Go
decisions
- Ore exploration, mine mapping,
excavation control, process
control, grade control and
environmental screening with
one tool
- Measure powders, rocks,
drill cores, sample cups,
sample bags
- Extensive selection of fundamental
parameter (FP) soil and mining
calibrations included in standard
delivery
- Empirical soil calibration
available for optimal accuracy
- Easy to use calibration
software available for ultimate
accuracy when known standards
are available
- GPS pairing by Bluetooth
with all receivers communicating
via NMEA protocol. Including
Trimble.
- Light element analysis on
prepared samples (Al, Si,
P, S. X-MET5100 only)
|
|
|
|
|
|
|
| X-MET for
compliance screening |
|
- Totally non-destructive
testing
- RoHS, ELV, Pb in toys, packaging
material, clothes and jewellery
screening in matter of seconds
- PVC detection based on Cl
analysis
- Quick and reliable Go/No-Go
decisions
- Customer specific calibrations
and optional calibration software
available for method development.
- Multi-matrix analysis. One
analyzer for metal and plastic
matrices. Automatic matrix
selection
|
|
|
|
|
|
|
| Markets: |
|
- Metals: scrap metal recycling,
positive material identification
(PMI), lead detection
- Petroleum, Petrochemicals,
Ultra Low Sulphur
- Minerals, Mining
- Restriction of Hazardous
Substances (RoHS); Waste Electronic
and Electrical Equipment (WEEE)
and End of Life Vehicle (ELV)
compliance
- Electronics, Paint coatings,
Plating and Metal finishing,
Precious metals
- Quality Control, Quality
Analysis: Chemical, Cosmetics,
Wood and various other industries
- Supplier of market leading
X-ray tubes to industry and
healthcare sectors
- State of the art detectors
to Space programs
|
|
