|
Temperature Sensor for the measurement
of molten metal temperature.
Designed for multiple dips in slag free molten
metal where only the quartz tube is immersed.
It consists of a Pt/Pt-Rh thermocouple in an extra
long quartz protection tube, cemented in a ceramic
housing, and fitted with a special high temperature
connector assuring complete contact even after
a number of dips.
This sensor can be used for 8-12 times
Depending on the intervals between successive
immersions and the metal temperature, the number
of measurements may vary.
Available in standard IPTS 68 and IPTS 90 calibrations
with different Thermocouple types:
No sputtering and spilling
Ideal for induction furnace and ladles
More number of readings per thermocouple tip results
in savings
Decreased 'burn-out' problems of contact block/
receptacle
Increased operator protection
Light weight and small size saves packing, freight
and storage cost
Measuring time: 3 to 12 seconds
Maximum immersion time : 8 seconds at 1650°C
Contact block - Mini / Mark VII
For Ferrous /Non Ferrous metal
Temperature Range : 500 to 1750 °C
Type "S" - Pt v/s Pt 10% Rh
Type "R" - Pt v/s Pt 13% Rh
For Nonferrous metal
Temperature Range : 300 to 1250 °C
Type "K" Chromel Alumel
|
